DC12v 30 LEDs/m DMX512 LED strip lights V2
DMX address increasing automatic, and address can be reset by address setter
Mode: BW5050RGB30T-DMX-V2
Mode: BW5050RGB30T-DMX-V2
Overview:Usually, digital LED strip data transmission in cascading, like ws2801, ws2811 and ws2812b, the fatal is that: a damaged IC will cause the whole following IC fail to work!! Sometimes thousands of LED failed just because of one broken IC. Now this parallel data transmission digital LED strip will be a good solution. All IC chips work separately, more stable and reliable! one broken≠ all broken.
Parameter:
1. DC12v, 7.2w/m
2. 30 LEDs/m, 10 pixels/m
3. 10pcs DMX512 IC, 1 IC drives 3 LEDs as 1 segment
4. 30 DMX channels per meter, 1 universe/512CH can drive MAX 17 meters
5. SMD5050 RGB, Epistars chips
6. Support both TTL and RS485 interface.
TTL: 12v, GND and DATA
RS485: A/B/GND/12V
Advantages:
1. DMX address increase automaticly from 1 to 512/1024/1536
2. Address can be reset by address setter at every segment, DMX512 Address setter PDF manual.
3. Parallel signal connection design, one broken IC will not affect the whole strip' working.
This DMX512 pixel addressable LED strips including 30 LEDs/m, 5meters/roll, each 3 LEDs be used as a pixel and individually controllable. There is a small tracking PCB on the input end to transfer signal, It can be controlled by all standar DMX512 controller directly, such as Madrix, Sunlite, Freestyler.
Each segment takes 3 channels, so 30 channels for 1 meter, like this:
(R1 = R2 = R3)= Channel 1
(G1 = G2 = G3)= Channel 2
(B1 = B2 = B3)= Channel 3
It is widely used for creating LED dispaly, night-club and bars decoration to show text and animation.
2. 30 LEDs/m, 10 pixels/m
3. 10pcs DMX512 IC, 1 IC drives 3 LEDs as 1 segment
4. 30 DMX channels per meter, 1 universe/512CH can drive MAX 17 meters
5. SMD5050 RGB, Epistars chips
6. Support both TTL and RS485 interface.
TTL: 12v, GND and DATA
RS485: A/B/GND/12V
| IP rating | Protection | Outer Size | Installation | Mode |
| IP40 | None | L5000*W12 | Double side tape | BW5050RGB30T-DMX-v2 |
| IP65 | Glue coating | L5000*W12 | Double side tape | DW5050RGB30T-DMX-v2 |
| IP67 | Silicone tube | L5000*W13 | screw + buckle | TW5050RGB30T-DMX-v2 |
| IP68 | Tube +glue filled | L5000*W13 | screw + buckle | JW5050RGB30T-DMX-v2 |
Advantages:
1. DMX address increase automaticly from 1 to 512/1024/1536
2. Address can be reset by address setter at every segment, DMX512 Address setter PDF manual.
3. Parallel signal connection design, one broken IC will not affect the whole strip' working.
This DMX512 pixel addressable LED strips including 30 LEDs/m, 5meters/roll, each 3 LEDs be used as a pixel and individually controllable. There is a small tracking PCB on the input end to transfer signal, It can be controlled by all standar DMX512 controller directly, such as Madrix, Sunlite, Freestyler.
Each segment takes 3 channels, so 30 channels for 1 meter, like this:
(R1 = R2 = R3)= Channel 1
(G1 = G2 = G3)= Channel 2
(B1 = B2 = B3)= Channel 3
It is widely used for creating LED dispaly, night-club and bars decoration to show text and animation.
Click TO Buy
没有评论:
发表评论