#3 UCS512 5V 32 pixels LED tape

DC5v DMX512/UCS512 addressable pixel 32 LED/m RGB stripe

Mode: BB5050RGB32T-ucs-5V

Overview:DMX512/1990 protocol addressable RGB LED strips, special design for DMX512 control system, 32 individually pixel per meter and 96 channels per meter, about 5.3 meters per universe. 
  
 
Features

1. Parallel signal running, more reliable:  one broken IC/LED will not cause the following IC cascading failure 

2. DMX address can be reset easily 

3. Support standard DMX512 interface 
 
  
Parameter: 

1. DC5v, MAX 10 watts/meter 

2. 32 LEDs/m, 32 pixels/meter 

3. 1 LEDs as 1 segment can be cut off 

4. 96 DMX channels per meter, 1 universe/512CH can drive MAX 5.3 meters 

5. SMD5050 RGB, Epistars chips  

6. Signal input: TTL & RS485 
7. Packaging: 5 meter/roll 

8. white or black PCB 

IP rating	Protection	Outer Size	Installation	Mode
IP40	None	L5000*W12	Double side tape	BB5050RGB32T-ucs-5V
IP65	Glue coating	L5000*W12	Double side tape	DB5050RGB32T-ucs-5V
IP67	Silicone tube	L5000*W13	screw + buckle	TB5050RGB32T-ucs-5V
IP68	Tube +glue filled	L5000*W13	screw + buckle	JB5050RGB32T-ucs-5V

 
 

Advantages:
1.  DMX address increase automaticly; 
2. Each LED is individually controllable; 

3. It is controllable with MADRIX / freestyle.  

Click to Buy

#2 DMX512 5V 34 pixel LED strip

DC5v 34 LEDs/m DMX512 LED strip lights

Mode: BB5050RGB34T-DMX-5V

Parameter: 

1. DC5v, MAX 10watts/meter;  

2. 34 LEDs/m, 34 pixels/meter and 5 meters per universe; 

3. 1 LEDs as 1 segment;  

4. 102 DMX channels per meter, 1 universe/512CH can drive MAX 5meters(1 roll); 

5. SMD5050 RGB, Epistars chips;  

6. Standard DMX512 interface: A/B/GND/5V 
7. Packaging: 5 meter/roll. 

IP rating	Protection	Outer Size	Installation	Mode
IP40	None	L5000*W12	Double side tape	BB5050RGB34T-DMX-5V
IP65	Glue coating	L5000*W12	Double side tape	DB5050RGB34T-DMX-5V
IP67	Silicone tube	L5000*W13	screw + buckle	TB5050RGB34T-DMX-5V
IP68	Tube +glue filled	L5000*W13	screw + buckle	JB5050RGB34T-DMX-5V

Advantages:
1.  DMX address increase automaticly from 1 to 512/1024/1536, NO need to set the address; 
2. Each LED is individually controllable; 

3. It is controllable with MADRIX / freestyle. 

Click to Buy

#1 DMX512 12V parallel 30 LED RGB strips

DC12v 30 LEDs/m DMX512 LED strip lights V2

DMX address increasing automatic, and address can be reset by address setter 
Mode: BW5050RGB30T-DMX-V2

Overview:Usually, digital LED strip data transmission in cascading, like ws2801, ws2811 and ws2812b, the fatal is that: a damaged IC will cause the whole following IC fail to work!! Sometimes thousands of LED failed just because of one broken IC. Now this parallel data transmission digital LED strip will be a good solution. All IC chips work separately, more stable and reliable!  one broken≠ all broken.
 
 

Parameter: 

1. DC12v, 7.2w/m 

2. 30 LEDs/m, 10 pixels/m 

3. 10pcs DMX512 IC, 1 IC drives 3 LEDs as 1 segment 

4. 30 DMX channels per meter, 1 universe/512CH can drive MAX 17 meters

5. SMD5050 RGB, Epistars chips 

6. Support both TTL and RS485 interface. 
    TTL: 12v, GND and DATA
     RS485: A/B/GND/12V 

IP rating	Protection	Outer Size	Installation	Mode
IP40	None	L5000*W12	Double side tape	BW5050RGB30T-DMX-v2
IP65	Glue coating	L5000*W12	Double side tape	DW5050RGB30T-DMX-v2
IP67	Silicone tube	L5000*W13	screw + buckle	TW5050RGB30T-DMX-v2
IP68	Tube +glue filled	L5000*W13	screw + buckle	JW5050RGB30T-DMX-v2

Advantages:

1.  DMX address increase automaticly from 1 to 512/1024/1536 
2. Address can be reset by address setter at every segment, DMX512 Address setter PDF manual.
3. Parallel signal connection design, one broken IC will not affect the whole strip' working. 

This DMX512 pixel addressable LED strips including 30 LEDs/m, 5meters/roll, each 3 LEDs be used as a pixel and individually controllable. There is a small tracking PCB on the input end to transfer signal, It can be controlled by all standar DMX512 controller directly, such as Madrix, Sunlite, Freestyler. 

Each segment takes 3 channels, so 30 channels for 1 meter, like this: 
(R1 = R2 = R3)= Channel 1
(G1 = G2 = G3)= Channel 2
(B1 = B2 = B3)= Channel 3
 
It is widely used for creating LED dispaly, night-club and bars decoration to show text and animation. 

Click TO Buy